DX268V TFO Primary Twisting Machine | ||||
Model Number | Type I | Type Ⅱ | Type Ⅲ | Type Ⅳ |
Spindle gauge | 180mm | 225mm | 200mm | 450mm |
Process material | Long fiber | |||
Operating mode | Manual | |||
Share method | Two in one/Three in one | |||
Per-section spindles | 24 Spindle | 18 Spindle | 30 Spindle | 10 Spindle |
Per-unit section numbers | ≤12 Section | ≤12 Section | ≤16 Section | ≤12 Section |
Yarn count range | 100~250 Filament | 250~800 Filament | 100~300 Filament | 800D~3000D Filament |
Spindle speed | ≤10000r/min | ≤8000r/min | ≤10000r/min | ≤6000r/min |
Twist range | 50~2000T/M | 50~2000T/M | 50~2000T/M | 50~2000T/M |
(Feed in) Winding size | Φ90*380 Winding Cannonball Tube | Φ130*380Winding Cannonball Tube | Φ90*380Winding Cannonball Tube | Φ260*290Winding Cannonball Tube |
Winding weight | 6KG/4KG/3KG/2KG | 6KG/4KG | 6KG/4KG/3KG/2KG | 8KG |
Winding speed | ≤80m/min | ≤80m/min | ≤80m/min | ≤80m/min |
Spindle selection | Φ90 | Φ110 | Φ90/Φ110 | Φ250 |
Winding bobbin | ||||
Power confinguration | According to different configurations, the power configuration is 15KW~30KW | |||
Transfer method | Dragon belt collective transmission | Dragon belt collective transmission | Single spindle motor drive | Dragon belt collective transmission |
Standard spindle number | 240 Spindle | 216 Spindle | 360 Spindle | 108 Spindle |
Overall size | Length * width =24800*730 | Length * width =27750*730 | Length * width =26300*810 | Length * width =27750*900 |
Features 1. This machine is the second-generation double-twisting and double-twisting machine designed and manufactured by our company. It can combine two or three strands of yarn/thread at the same time into one strand. It is mainly used for webbing, sewing thread, cord, high strength The initial twisting process of the yarns, such as silk, requires an initial twisting process. 2. In response to the needs of different customers, we have developed a variety of highly targeted models to maximize their working efficiency and subvert the traditional ring spindle processing concept. 3. The joint tension is uniform, the strong loss is small, the uneven rate is low, and the output is high. 4. Each spindle is equipped with a yarn break and speed detection device, and an alarm light is installed (some models are equipped with a cutter) to strictly control the yarn quality. 5. To meet the market's demand for reducing labor costs, the DX268V-Ⅲ type electric spindle has been developed. The motor uses DC brushless technology, and the power consumption of the traditional single motor is reduced by about 30%, and the speed error between the spindle and the spindle Will be controlled within 3‰. Yarn break will stop automatically, and unmanned management will go further. | ||||
|
|